
Example: The New York Times Building
The tower was designed by Renzo Piano Building Workshop and FXFOWLE Architects, with Gensler providing interior design.
The tower rises 748 feet (228 m) from the street to its roof, with the exterior curtain wall extending 92 feet higher to 840 feet (256 m), and a mast rising to 1,046 feet (319 m). As of 2008, the building is tied with the Chrysler Building as the third tallest building in New York and the seventh tallest in the United States.
The steel-framed building, cruciform in plan, utilizes a screen of 1-5/8" (41.3mm) ceramic rods mounted on the exterior of the glass curtain wall on the east, west and south facades. The rod spacing increases from the base to the top, providing greater transparency as the building rises. The steel framing and bracing is exposed at the four corner "notches" of the building.
http://en.wikipedia.org/wiki/New_York_Times_Building

Example: Trump Tower Chicago
photograph and front elevation of the building.

A typical curtain wall section showing a 15'-0" clearance from finished floor to finished ceiling. We will use this module as a guide.

No comments:
Post a Comment